Deciding between the SEGA Mega Drive Triple Bypass V2 RGB Mod Kit and the PS1 Digital to Digital HDMI Mod Kit is really about which console you plan to upgrade. One kit is an analog RGB and audio cleanup for Genesis/Mega Drive systems; the other is a digital-to-digital HDMI output upgrade for the PlayStation 1. Both are bare PCB and flex kits that require soldering, so your decision should be driven by the console you own, the display you use, and the price you are willing to invest.
Quick verdict
If you want a sharper, cleaner analog signal for a Sega Mega Drive or Genesis, the Triple Bypass V2 is the lower-cost, dual-purpose choice at USD 15.75. If you need HDMI from a PS1 without relying on an external converter, the PS1 Digital to Digital HDMI Mod Kit offers 1080P output and a full on-screen menu, but it costs USD 32.75 more.
Comparison at a glance
| Kit | Price | Price bar | Primary job |
|---|---|---|---|
| Brand New Triple Bypass V2 RGB MOD Kit for SEGA Mega Drive/Genesis Console | USD 15.75 | RGB bypass and audio amp | |
| For PS1 Digital to Digital HDMI Mod Kit For Playstaion PS1 Console | USD 48.50 | Digital-to-digital HDMI output |
Where each product wins
The Triple Bypass V2 wins for Sega owners who want two common fixes on one board. It combines a THS7374 video amplifier with the Mega Amp 2 audio mod, targeting jailbars and muffled audio that are most noticeable on Mega Drive 2 consoles. The PS1 HDMI mod kit wins for PlayStation owners who want a true digital-to-digital HDMI signal, with 480P and 1080P output modes, a built-in OSD menu, three video modes, six aspect ratios, and adjustable deinterlacing. The USD 32.75 price gap is substantial, but these kits solve entirely different problems.
Brand New Triple Bypass V2 RGB MOD Kit for SEGA Mega Drive/Genesis Console
This is the more affordable entry point at USD 15.75, and it packs two Sega mods into one black PCB. The board combines an RGB bypass circuit with a THS7374 video amplifier and a Mega Amp 2 audio section, so you can reduce jailbars and clean up muffled audio in a single installation. It is designed for Mega Drive/Genesis MK1, Mega Drive 2, and Genesis 3 consoles. The obvious limitation is that this is an analog-focused kit: it improves RGB video and audio but focuses on that path rather than digital HDMI. It also requires soldering skills, so it is not a plug-and-play upgrade. If your goal is a better analog picture from a Sega console, this is the focused, wallet-friendly route.
For PS1 Digital to Digital HDMI Mod Kit For Playstaion PS1 Console
This blue PCB and flex kit is the more expensive upgrade at USD 48.50, but it changes the PS1's output in a more fundamental way. It takes the console's digital signal and sends it over HDMI, with support for 480P and 1080P output. You also get a built-in OSD menu, three video modes (Mild, Standard, Dynamic), six aspect ratio options, and adjustable deinterlacing with Bob and Weave modes. The kit is designed specifically for PS1 consoles using a PU-23 CXD8561CQ ribbon cable and must be soldered into the console; the seller notes that good welding skills are required. The main limitation is the higher price and the fact that this kit is built around digital-to-digital HDMI output, so it is not aimed at analog RGB capture.
Final choice by use case
Choose the Triple Bypass V2 if you own a Mega Drive or Genesis and want to clean up RGB video and audio without spending a lot. It is the better match for analog capture or CRT use. Choose the PS1 Digital to Digital HDMI Mod Kit if you own a PS1 and want a direct HDMI output with resolution and aspect ratio controls. The two kits do not really compete; they serve different consoles and different signal paths, so pick the one that matches the console on your bench.
